xPec

[SOLUCIONADO ] LEER ABAJO CUAL ERA EL PROBLEMA . Cuando queria compilar un mapa el log me daba este error que van a ver abajo. De lo cual causaba que los programas ZHLT no compilen el mapa. LOG -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ** Executing... ** Command: Change Directory ** Parameters: D:\JUEGOS\PIRATEADO\CS 1.6\Counter-Strike 1.6 ** Executing... ** Command: Copy File ** Parameters: "D:\COSAS\Valve hammer editor mapas\escuelita_beta.map" "D:\COSAS\Valve hammer editor mapas\escuelita_beta.map" ** Executing... ** Command: D:\COSAS\vhe 3.5\Zhlt\SC-CSG_x64.exe ** Parameters: "D:\COSAS\Valve hammer editor mapas\escuelita_beta" Unknown option "D:\COSAS\Valve hammer editor mapas\escuelita_beta" hlcsg v4.0-VL-SC 64-bit (Oct 30 2020) Zoner's Half-Life Compilation Tools -- Custom build for Sven Co-op Based on code modifications by Vluzacn (VL) Based on code modifications by Sean "Zoner" Cavanaugh (4.0) Based on Valve's version, modified with permission. Submit detailed bug reports to http://forums.svencoop.com -= hlcsg Options =- -console # : Set to 0 to turn off the pop-up console (default is 1) -lang file : localization file -nowadtextures : include all used textures into bsp -wadinclude file : place textures used from wad specified into bsp -noclip : don't create clipping hull -clipeconomy : turn clipnode economy mode on -cliptype value : set to smallest, normalized, simple, precise, or legacy (default) -nullfile file : specify list of entities to retexture with NULL -onlyents : do an entity update from .map to .bsp -noskyclip : disable automatic clipping of SKY brushes -tiny # : minimum brush face surface area before it is discarded -brushunion # : threshold to warn about overlapping brushes -hullfile file : Reads in custom collision hull dimensions -wadcfgfile file : wad configuration file -wadconfig name : use the old wad configuration approach (select a group from wad.cfg) -texdata # : Alter maximum texture memory limit (in kb) -lightdata # : Alter maximum lighting memory limit (in kb) -chart : display bsp statitics -low | -high : run program an altered priority level -nolog : don't generate the compile logfiles -noresetlog : Do not delete log file -threads # : manually specify the number of threads to run -estimate : display estimated time during compile -verbose : compile with verbose messages -noinfo : Do not show tool configuration information -nonulltex : Turns off null texture stripping -nonullifytrigger: don't remove 'aaatrigger' texture -nolightopt : don't optimize engine light entities -notextconvert : don't convert game_text message from Windows ANSI to UTF8 format -dev # : compile with developer message -wadautodetect : Force auto-detection of wadfiles -scale # : Scale the world. Use at your own risk. mapfile : The mapfile to compile ** Executing... ** Command: D:\COSAS\vhe 3.5\Zhlt\SC-BSP_x64.exe ** Parameters: "D:\COSAS\Valve hammer editor mapas\escuelita_beta" Unknown option "D:\COSAS\Valve hammer editor mapas\escuelita_beta" hlbsp v4.0-VL-SC 64-bit (Oct 30 2020) Zoner's Half-Life Compilation Tools -- Custom build for Sven Co-op Based on code modifications by Vluzacn (VL) Based on code modifications by Sean "Zoner" Cavanaugh (4.0) Based on Valve's version, modified with permission. Submit detailed bug reports to http://forums.svencoop.com -= hlbsp Options =- -console # : Set to 0 to turn off the pop-up console (default is 1) -lang file : localization file -leakonly : Run BSP only enough to check for LEAKs -subdivide # : Sets the face subdivide size -maxnodesize # : Sets the maximum portal node size -notjunc : Don't break edges on t-junctions (not for final runs) -nobrink : Don't smooth brinks (not for final runs) -noclip : Don't process the clipping hull (not for final runs) -nofill : Don't fill outside (will mask LEAKs) (not for final runs) -noinsidefill : Don't fill empty spaces -noopt : Don't optimize planes on BSP write (not for final runs) -noclipnodemerge: Don't optimize clipnodes -texdata # : Alter maximum texture memory limit (in kb) -lightdata # : Alter maximum lighting memory limit (in kb) -chart : display bsp statitics -low | -high : run program an altered priority level -nolog : don't generate the compile logfiles -threads # : manually specify the number of threads to run -estimate : display estimated time during compile -nonulltex : Don't strip NULL faces -nohull2 : Don't generate hull 2 (the clipping hull for large monsters and pushables) -viewportal : Show portal boundaries in 'mapname_portal.pts' file -verbose : compile with verbose messages -noinfo : Do not show tool configuration information -dev # : compile with developer message mapfile : The mapfile to compile ** Executing... ** Command: D:\COSAS\vhe 3.5\Zhlt\SC-VIS_x64.exe ** Parameters: -fast "D:\COSAS\Valve hammer editor mapas\escuelita_beta" g_fastvis = true Unknown option "D:\COSAS\Valve hammer editor mapas\escuelita_beta" hlvis v4.0-VL-SC 64-bit (Oct 30 2020) Zoner's Half-Life Compilation Tools -- Custom build for Sven Co-op Based on code modifications by Vluzacn (VL) Based on code modifications by Sean "Zoner" Cavanaugh (4.0) Based on Valve's version, modified with permission. Submit detailed bug reports to http://forums.svencoop.com -= hlvis Options =- -console # : Set to 0 to turn off the pop-up console (default is 1) -lang file : localization file -full : Full vis -fast : Fast vis -texdata # : Alter maximum texture memory limit (in kb) -lightdata # : Alter maximum lighting memory limit (in kb) -chart : display bsp statitics -low | -high : run program an altered priority level -nolog : don't generate the compile logfiles -threads # : manually specify the number of threads to run -estimate : display estimated time during compile -maxdistance # : Alter the maximum distance for visibility -verbose : compile with verbose messages -noinfo : Do not show tool configuration information -dev # : compile with developer message mapfile : The mapfile to compile ** Executing... ** Command: D:\COSAS\vhe 3.5\Zhlt\SC-RAD_x64.exe ** Parameters: "D:\COSAS\Valve hammer editor mapas\escuelita_beta" Unknown option "D:\COSAS\Valve hammer editor mapas\escuelita_beta" hlrad v4.0-VL-SC 64-bit (Oct 30 2020) Zoner's Half-Life Compilation Tools -- Custom build for Sven Co-op Based on code modifications by Vluzacn (VL) Based on code modifications by Sean "Zoner" Cavanaugh (4.0) Based on Valve's version, modified with permission. Submit detailed bug reports to http://forums.svencoop.com -= hlrad Options =- -console # : Set to 0 to turn off the pop-up console (default is 1) -lang file : localization file -waddir folder : Search this folder for wad files. -fast : Fast rad -vismatrix value: Set vismatrix method to normal, sparse or off . -extra : Improve lighting quality by doing 9 point oversampling -bounce # : Set number of radiosity bounces -ambient r g b : Set ambient world light (0.0 to 1.0, r g b) -limiter # : Set light clipping threshold (-1=None) -circus : Enable 'circus' mode for locating unlit lightmaps -nospread : Disable sunlight spread angles for this compile -nopaque : Disable the opaque zhlt_lightflags for this compile -smooth # : Set smoothing threshold for blending (in degrees) -smooth2 # : Set smoothing threshold between different textures -chop # : Set radiosity patch size for normal textures -texchop # : Set radiosity patch size for texture light faces -notexscale : Do not scale radiosity patches with texture scale -coring # : Set lighting threshold before blackness -dlight # : Set direct lighting threshold -dscale # : Set direct lighting scale -nolerp : Disable radiosity interpolation, nearest point instead -fade # : Set global fade (larger values = shorter lights) -texlightgap # : Set global gap distance for texlights -scale # : Set global light scaling -gamma # : Set global gamma -sky # : Set ambient sunlight contribution in the shade outside -lights file : Manually specify a lights.rad file to use -noskyfix : Disable light_environment being global -incremental : Use or create an incremental transfer list file -dump : Dumps light patches to a file for hlrad debugging info -texdata # : Alter maximum texture memory limit (in kb) -lightdata # : Alter maximum lighting memory limit (in kb) -chart : display bsp statitics -low | -high : run program an altered priority level -nolog : Do not generate the compile logfiles -threads # : manually specify the number of threads to run -estimate : display estimated time during compile -verbose : compile with verbose messages -noinfo : Do not show tool configuration information -dev # : compile with developer message -colourgamma r g b : Sets different gamma values for r, g, b -colourscale r g b : Sets different lightscale values for r, g ,b -colourjitter r g b : Adds noise, independent colours, for dithering -jitter r g b : Adds noise, monochromatic, for dithering -customshadowwithbounce : Enables custom shadows with bounce light -rgbtransfers : Enables RGB Transfers (for custom shadows) -minlight # : Minimum final light (integer from 0 to 255) -compress # : compress transfer ( 0=32bit 1=16bit 2=8bit ) -rgbcompress # : compress RGB transfer ( 0=96bit 1=48bit 2=32bit 3=24bit ) -softsky # : Smooth skylight. (0=off 1=on) -depth # : Thickness of translucent objects. -blockopaque # : Remove the black areas around opaque entities.(0=off 1=on) -notextures : Don't load textures. -texreflectgamma # : Gamma that relates reflectivity to texture color bits. -texreflectscale # : Reflectivity for 255-white texture. -blur # : Enlarge lightmap sample to blur the lightmap. -noemitterrange: Don't fix pointy texlights. -nobleedfix : Don't fix wall bleeding problem for large blur value. -drawpatch : Export light patch positions to file 'mapname_patch.pts'. -drawsample x y z r : Export light sample positions in an area to file 'mapname_sample.pts'. -drawedge : Export smooth edge positions to file 'mapname_edge.pts'. -drawlerp : Show bounce light triangulation status. -drawnudge : Show nudged samples. -drawoverload : Highlight fullbright spots mapfile : The mapfile to compile -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- EL problema estaba en el directorio de la carpeta donde tenia el "hammer" y a donde iban los "mapas compilados". El problema es que habian espacios vacios en el nombre de la carpeta : EJ "VALVE HAMMER EDITOR" la solución para mi fue ponerlo así "VALVE_HAMMER_EDITOR" y con la carpeta donde iban los mapas también fue corregida EJ: "VALVE HAMMER EDITOR MAPAS" fue cambiado su nombre a "VALVE_HAMMER_EDITOR_MAPAS" de ahí en adelante configurar de vuelta de cero el programa y el directorio a donde iban los mapas compilados. Espero que esto le puede servir a gente que tenga este error similar al que yo tuve. Gracias

Ya encontré la solución, era una tontería, solo era poner una textura "null" aldedor de la parte exterior del cubo de la "Skybox" , buscar los problemas con los "leak" en el mapa y activar el "RAD" en el compilador del vhe. Agradezco tu atención.

MAPAZO

Buenas que tal me presento Soy xPec soy nuevo en el foro y este es el problema que tengo con el valve hammer editor 3.5 : Soy un usuario nuevo en esto de mappear, conozco algo mínimo en eso del uso del programa pero el problema empieza cuando al mapa le quiero poner cualquier tipo de entidad de iluminación sea cual sea. El mapa cuando es compilado sale con mucho brillo osea no hay sombras y tiene luz por demás, ya probé con ponerle un target al light enviroment como otras cosas que no me han sido útiles para solucionar eso, el mapa no lo terminé todavía por que antes quería probar eso de la iluminación. Si pueden darme una ayudita agradezco